Jumpguard Pro DIY Aquarium Cover
There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet.
Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.
D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.
The new Jumpguard Pro now includes cut out and brace bar parts as standard and an aesthetic black mesh.
Notes:
- The maximum size frame that can be made from each kit will be 3.6cm (1.4 inches) longer than stated in each direction.
- The tank should be measured from inside face of glass to inside face of glass and not the outer dimensions of the tank, which will vary due to glass thickness.
Available in the following versions and are designed to be cut to size:
- TC7575PRO – 75cm x 75cm nominal size. (29.5 inches x 29.5 inches)
- TC12075PRO – 120cm x 75cm nominal size. (47.25 inches x 29.5 inches)
- TC18090PRO – 180cm x 90cm nominal size. (70.8 inches x 35.4 inches)
Kit Contents:
TC7575
90cm x 90cm (36″ x 36″) 1PC bird mesh, black material
5 x 75cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline,total length 3.5m
2 x Black finger pull
2 x Reverse corner
1 x 75cm brace bar
4 x brace clips
TC12075
140cm x 90cm (55″ x 36″) 1PC bird mesh, black material
3 x 75cm + 2 x 120cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 4.4m
2 x Black finger pull
2 x Reverse corner
2 x 75cm brace bar
6 x brace clips
2 x T corners
TC18090
200cm x 110cm (79″ x 43″) 1PC bird mesh, black material
7 x 90cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 5.9m
2 x Black finger pull
8 x brace clips
3 x 90cm brace bar
2 x Reverse corner
2 x T corner
