Aquavitro – eight.four 350ml
$22.95 inc GST
- supplies a properly balanced buffer system that yields an industry leading pK of 8.6 which makes pH maintenance of 8.3-8.5 easy
- will safely raise marine pH while adjusting alkalinity
Many competing buffers for reef aquaria are simply sodium bicarbonate. Such buffers have a pK of only 8.0 in saltwater and simply are unable to maintain a pH above 8.0. The low buffering pK is a function of the low carbonate/bicarbonate ratio.
eight.four™ supplies a properly balanced (carbonate/bicarbonate) buffer system that yields an industry leading pK of 8.6 which makes pH maintenance of 8.3-8.5 easy. A higher pK increases the buffer’s ability to counteract inevitable acidic sources in the water. eight.four™ will safely raise marine pH while adjusting alkalinity. eight.four™ contains a concentrated, balanced blend of bicarbonate and carbonate salts designed to restore disrupted buffer systems and increase carbonate alkalinity.
If an alkalinity of 6 meq/L has been reached and a pH of at least 8.20 has not been attained, the system may be ionically unbalanced. Check magnesium levels. If magnesium is low, use ions™. However, if magnesium levels are within optimal range, the buffer ratio has likely been disrupted (the buffer ratio changes as a natural consequence of the buffer’s ability to counteract acidifying sources such as organic acids). You can raise pH without raising alkalinity using balance™.
Unlike competing products that require multi-day interval dosing when combined with carbonate supplements, eight.four™ can be dosed daily and within minutes of our calcification™ as well as balance™ and ions™
Dosing requirements will vary, but do not exceed the recommended dose without checking your pH and alkalinity (alkalinity should not exceed 6 meq/L). Use one inner capful (7 ml) for every 110 L (30 gallons*) daily until pH stabilizes to desired level.
pH stabilization may take from a day to a week, depending on original pH, alkalinity, and buffer system balance. Thereafter, use as needed to maintain pH.
Note: The aquavitro cap offers multiple dosing solutions depending on the size of your system. Each inner cap thread is approximately 2 mL. The inner cap contains 7 mL, while the outer ring contains 28 mL (35 mL when both are filled to the level of the inner cap.) When filled to the top, the cap contains 49 mL.