Fritz – Aqua ADHERE

Turn off any pumps or filters near the area where you’ll be working to prevent water flow from disturbing the bonding process. Trim any excess or damaged parts of the plant or coral to prepare a clean surface for attachment. This will also help ensure a better bond. Squeeze a small amount of Fritz aquaADHERE onto the part of the plant, coral or decorative object that you want to attach. Carefully place in the desired location within the aquarium. Hold it firmly in place for a short period (usually about 30 seconds to 1 minute) to allow the glue to set. Avoid excessive use of glue, as little can be sufficient to create a strong bond. If you need to reposition, try to do so gently and promptly. Fritz aquaADHERE sets quickly, so work efficiently but cautiously. Allow the glue to cure completely before turning the pumps or filters back on and introducing any fish or creatures to the area. Monitor for the first few hours to ensure it remains securely attached.

WARNING: Causes skin/respiratory irritation and serious eye irritation. KEEP OUT OF REACH OF CHILDREN. FIRST AID TREATMENT: If in eyes, rinse cautiously with water for several minutes and remove contact lenses. If irritation persists, get medical advice/attention.

Care instructions: Wipe the tip clean of any glue prior to tightening cap. Ensure the cap is tight. Store in a cool, dry location away from sunlight.

CAUTION: KEEP OUT OF REACH OF CHILDREN, MAY BE HARMFUL IF SWALLOWED. EYE IRRITANT.

Intended for aquarium use only. Follow instructions closely. Seek medical attention if product gets in eyes or mouth.